domains / families / devops / jetson-customize-uphy

jetson-customize-uphy

separate

Configure Jetson UPHY lane allocation (uphy0/uphy1-config) on Orin/Thor custom carriers. Do NOT use for pinmux or PCIe-only edits.

When to use

• Select a UPHY lane allocation on a Jetson custom carrier and edit the carrier flash-conf fork's `ODMDATA="..."` to apply the chosen `uphyX-config-N` token(s) (plus the `UPHY_CONFIG=""` clear required for `uphy0-config-6`). Kernel-DT alignm…

When not to use

• Only supports Tegra234 (Orin) and Tegra264 (Thor) UPHY surfaces.
• Does not edit pinmux, PCIe-only DT properties absent from BPMP DTB
• Does not flash, build, or promote — chain into `/jetson-build-source`
• Hard-coded option tables are forbidden; if no Adaptation Guide
• Not table-driven across releases: every run re-reads the Guide for

Skill page

Source