domains / families / devops / jetson-customize-pcie

jetson-customize-pcie

separate

Per-controller PCIe enable / disable / lanes / link-speed for a Jetson Thor or Orin custom carrier via ODMDATA + kernel-DT overlay. Do NOT use for UPHY lane allocation or endpoint-mode bring-up.

When to use

• configure PCIe
• enable PCIe controller
• set PCIe num-lanes
• change PCIe link speed
• flip a pcie@N_status token
• fix PCIe slot enumeration
• fix PCIe link width or speed
• bring up per-controller PCIe after UPHY re-allocation

When not to use

• **Mode hard-pinned to RC.** Endpoint mode is only emitted when the
• **`enable` is derived, not asked.** UPHY-allocated controllers are
• **No upstream BSP edits.** Output lands in `Linux_for_Tegra/` +
• **Pre-flight overlay merge is a sanity check**, not the production
• **Flash-conf overlay registration is out of scope.** Owned by

Skill page

Source