domains / families / devops / jetson-customize-nvpmodel

jetson-customize-nvpmodel

separate

Use when you need to add, remove, edit, list, or change the boot default of an nvpmodel power mode on a Jetson/Tegra (Orin, Thor) target. Triggers: edit power mode, tune frequency caps.

When to use

• Edit the per-board nvpmodel configuration so the device boots with the desired power-mode set, CPU/GPU/EMC/TPC clamps, and default mode. BSP-side only — all writes land in the overlay tracker, the upstream `bsp_image` copy is read-only. Th…

When not to use

• BSP-side scope only — this skill never invokes `nvpmodel -m` on a
• Edits land in the overlay copy under `<source.root_path>` only;
• Frequency values must come from the kernel's `available_frequencies`
• Non-trivial envelope edits (any CPU/GPU/EMC/PVA/DLA `MAX_FREQ` /
• Propagation across siblings is partial by design: only the changed
• PARAM names are chip-family-specific (e.g. `CPU_A78_<n>` on T234,

Skill page

Source